Table-top extraction arm of compact size is designed for removal soldering fumes, oil mists, vapors of chemical substances or fine dusts at local emission source.
Depending on a certain model device can be either installed on a table with a clamp or cut into a tabletop. Moreover it can be mounted to a wall with brackets or with a PA support column.
Industries and applications
• Electronics
• Pharmaceuticals
• Food industry
• Chemical industry
• Precision engineering
• Art and Jewelry
The extraction unit is designed for extended indoor operation under the following conditions:
– outdoor temperature + 5 … 45 °С;
– relative humidity not more than 80 % at 25 °С;
– airflow temperature must not exceed 80 °С.
- Free flow ducts
- Various mountings
- Wide selection of different types
- Gas shock absorber
- Built-in damper
- Two types of suction nozzles
- Table clamp
- Robust design
| Article № | Model | Reach area, m | Ø Diameter, mm | Recommended airflow, m3/h | Installation height, m |
|---|---|---|---|---|---|
| 5383 | LabArm -75-07S | 0.7 - 1.0 | |||
| 5347 | LabArm -75-10S | ||||
| 5349 | LabArm -75-15S | ||||
| 5348 | LabArm -75-10H | ||||
| 5350 | LabArm -75-15H | ||||
| 5381 | LabArm -100-15S | 0.7 - 1.0 | |||
| 5382 | LabArm -100-15H | ||||
| 5384 | LabArm -125-2S | 1.0 - 2.0 | |||
| 5385 | LabArm -125-3S | ||||
| 5386 | LabArm -125-2H | ||||
| 5387 | LabArm -125-3H |
Dimensions
Extraction arm LabArm-75-07 (short)
Extraction arms LabArm-75-10S (H), LabArm-75-15S (H)
Universal mount bracket (Models LabArm-75-07, LabArm-75-10S (H), LabArm-75-15S (H)
| Model | L, mm | A, mm | B, mm | C, mm | D1, mm | D2, mm | E, mm | F, mm |
|---|---|---|---|---|---|---|---|---|
| LabArm-75-10S | 1275 | 542 | 424 | 241 | 130 | 75 | 152 | 115 |
| LabArm-75-15S | 1565 | 622 | 634 | 241 | 130 | 75 | 152 | 115 |
| LabArm-75-10H | 1275 | 542 | 424 | 241 | 130 | 75 | 153 | 115 |
| LabArm-75-15H | 1565 | 622 | 634 | 241 | 130 | 75 | 153 | 115 |
Extraction arms LabArm-100-15S (H), LabArm-125-2S (H), LabArm-125-3S (H)
| Model | L, mm | A, mm | B, mm | C, mm | D, mm | E, mm | a, mm | b, mm | c, mm | d, mm | e, mm | f, mm | i, mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LabArm-100-15S | 1670 | 749 | 836 | 100 | 200 | 100 | 175 | 144 | 80 | 8.5 | 50 | 17 | 15.5 |
| LabArm-100-15H | 1670 | 749 | 836 | 100 | 200 | 100 | 175 | 144 | 80 | 8.5 | 50 | 17 | 15.5 |
| LabArm-125-2S | 2000 | 929 | 641 | 125 | 230 | 100 | 310 | 270 | 140 | 13 | 100 | 20 | 20 |
| LabArm-125-3S | 3000 | 929 | 641 | 125 | 230 | 100 | 310 | 270 | 140 | 13 | 100 | 20 | 20 |
| LabArm-125-2H | 2000 | 1458 | 1113 | 125 | 230 | 100 | 310 | 270 | 140 | 13 | 100 | 20 | 20 |
| LabArm-125-3H | 3000 | 1458 | 1113 | 125 | 230 | 100 | 310 | 270 | 140 | 13 | 100 | 20 | 20 |
| Model | Type of mounting | Delivery set |
|---|---|---|
| LabArm -75-07S | Over bracket or under it (universal) 1. To a wall or other alike vertical surfaces - with a bracket 2. To a tabletop by a clamp and a bracket 3. To a horizontal tabletop surface through aperture cut (bracket and clamp are not used) | 1. Two nozzle types: round conical and straight horn-type 2. Bracket for wall mounting 3. Clamp to a tabletop side 4. Control valve 5. Without gas shock absorber |
| LabArm -75-10S | Over bracket 1. To a wall or other alike vertical surfaces - with a bracket 2. To a tabletop by a clamp and a bracket 3. To a horizontal tabletop surface through aperture cut (bracket and clamp are not used) | 1. Two nozzle types: round conical Ø130 mm and straight horn-type Ø75mm 2. Bracket for wall mounting 3. Clamp to a tabletop side 4. Control valve 5. Gas shock absorber |
| LabArm -75-15S | ||
| LabArm -75-10H | Under bracket 1. To a wall or other alike vertical surfaces - with a bracket | 1. Two nozzle types: round conical Ø130 mm and straight horn-type Ø75mm 2. Bracket for wall mounting 3. Control valve 4. Gas shock absorber |
| LabArm -75-15H | ||
| LabArm -100-15S | Over bracket 1. To a wall or other alike vertical surfaces - with a bracket 3. To a horizontal tabletop surface through aperture cut (bracket and clamp are not used) | 1. Round conical nozzle Ø200 mm 2. Bracket for wall mounting 3. Control valve 4. Gas shock absorber |
| LabArm -100-15H | Under bracket 1. To a wall or other alike vertical surfaces - with a bracket |
|
| LabArm -125-2S | Over bracket 1. To a wall or other alike vertical surfaces - with a bracket 2. To a horizontal tabletop surface through aperture cut (bracket and clamp are not used) 3. To a wall or ceiling with the beam-column PA-110 or PA-220 | 1. Round conical nozzle Ø230 mm 2. Bracket for wall mounting 3. Control valve 4. Gas shock absorber (1 or 2) |
| LabArm -125-3S | ||
| LabArm -125-2H | Under bracket 1. To a wall or other alike vertical surfaces - with a bracket 2. To a wall or ceiling with the beam-column PA-110 or PA-220 |
|
| LabArm -125-3H |
Usually used with
Contacts
Arrisa Avenue, Unit #15, Office No. 303, 3rd Floor, Kolte Patil Downtown, Kharadi, Pune-411014, India