This section presents a range of industrial dust collectors designed to clean the air from dust of various types such as construction dust, cement, coal, food, paper, glass, wood, textile, dust of lime, chalk, gypsum, dolomite etc.
Minimum size of captured dust from 0.3 microns. The maximum inlet dust concentration for SFS series of collection units is 60 g/m3.
Dust collectors presented below are designed for both indoor and outdoor use at low outdoor temperatures..
Need help to get the right equipment for your project?
Our experts are ready to answer all your questions.
Application
Filters are used to clean the air removed from workplaces and from technological equipment: crushers, screens, mills, conveyors, hoppers, drums, etc.
Applications: metallurgical, chemical, mining, processing, construction and other industries.
Summary technical characteristics of stock dust collectors
The model range consists of five types of dust collectors, its technical characteristics are summarized in the table below:
| Performance, m3/hour | 150 000 | 150 000 | ||
| Formal gas load (filtration rate), m3/m2 min* | ||||
| Pressure drop, operating/ maximum, Pa | ||||
| Filtration material type | ||||
| Method of filter element regeneration | ||||
| Maximum inlet dust concentration, g/m3* | ||||
| Standard value of residual concentration of dust, mg/m3 | ||||
| Possible value of residual concentration of dust, mg/m3** | ||||
| Maximum airflow temperature, °C | ||||
| Minimal outdoor temperature, °C | Outdoor design - 40** |
|||
| Operating mode | ||||
| Possibility of antistatic design | ||||
*Selection of dust collector model and filtration rate for specific operating conditions should be performed in cooperation with the manufacturer’s specialist.
**Optional parameter. The selection of the unit model for the specific operating conditions should be carried out in cooperation with the manufacturer’s specialist.
Structural elements of the maximum dust collector set
Technological features of the dust collectors
- Wide model range of modular dust collectors with application of pocket, bag and cartridge filtration elements;
- Air capacity from 550 to 2 000 000 m³/h;
- Filtration of dust flows with temperature up to +80°C in standard version and up to +260°C in high-temperature version;
- High degree of purification – residual concentration of dust 5-10 mg/m3 and less;
- Long service life of filter material – up to 2 years of continuous operation (20 000 hours);
- Simple, convenient and safe maintenance of filter elements of SFN and SFL units with horizontal removal from the “clean” area of the dust collector;
- Easily accessible regeneration system of SFN and SFL collectors;
- Possibility to increase the capacity of the aspiration system by partial modernization of design elements of the already installed dust collector;
- Modular design of dust collectors;
- Possibility of additional protection of the filter unit housing.
Contacts
Arrisa Avenue, Unit #15, Office No. 303, 3rd Floor, Kolte Patil Downtown, Kharadi, Pune-411014, India